V Grooving Machine for cardboard / Board Slotting Machine
Automatic Grooving Machine catalog.pdf
Product Description
Grooving Machine professor for Cover Paper 200gsm to 400gsm
Cardbaordpaperboard ,MDF board ,Cardboard,ect, the machine adopts
new type of cardboard convering ,the whole flat of paper board slot
encase the 60 cm diameter roller surface ,the ensure accurate that
the slot is accurate,no deviation and straight,has the
characteristics of high precision,high speed,durable cutting tool.
Cover Paper range from 200gsm to 400gsm.
Product Feature
1, slot effect: no burrs ,no dust, V Groove surface is smooth.
2, Environmental protection and energy saving: the total power
consumption is 2.0 kw.been cut V groove material can recycle in
whole( the cost can equal to power cost plus cutting tool cost) and
low noise.
3, Production efficiency:manual plate feeding speed 8 hours can
produce about 10000 boxes.
4, Durable cutting tool:with special knife grinder (simple),grind a
knife only need 2 minutes,the client may sharpen yourself.
5, Adjustable cutter angle: two pieces of independent blade and
fixture,different angles without customized blades,machine can
adjust itself ,different cardboard thickness without adjustment can
be slotted,use very convenient.
Product Parameters
| Model | WM-1200A |
| Roating speed | 30m /min |
| Power | 2.0KW/220V/50HZ/1Phase |
| Deep of groove | 1~4mm |
| Max. width of each group | 900 mm |
| Max. width of board | 800 mm |
| Feeder power | 0.18 KW |
| Speed of feeder | 0~180pcs/min(adjust) |
| Board specification | 120~430mm |
| Travel of feeder | 185mm |
| Power of conveyor belt | 0.18 KW |
| Dimension | L1780×W1680×H1480 mm |
Product Advantage
1. After notching, the surface of cardboard is very clean and no
dust.
2. The machine is very Economic, total power is 2.2KW only and it
is little noise.
3. The machine can produce about 1000 pcs boxes per hour that
feeding by hand,it is very fast.
4. The cutting blade can cut 8000-12000 sheets one time, then you
should to sharp the blade and it is takes about two minutes only.
We will supply a sharpen machine by free and it’s very easy to
operation.
5. The machine could groove any thickness from 300gsm-3.6mm.
6. It adopts new way of transportation principle. Wrap the
cardboard on the entire surface of the roller (The diameter is
61cm), It can guarantee the groove more accurately, no deviation
and straightly.
7. The machine has the features of high accuracy, fast speed and
durable cutting blade.
Product Character
1. Each cutting blade could move left and right by itself.
2. Double sides position plate are adjustable. The can ensure the
precision.
3. The belt press wheel could adjust the pressure of belt.
4. The counter is used for record the number of production.
5. The wheel is use for adjust grooving degree from 80-140.
6. Scrap remove equipment.
7. Special use knife grinder, usually grind one piece of cutting
blade need 2 minutes only.
8. Cutting blade and holder.
9. Standby belt and 4kw adjustable speed Frequency converter.
